Refer to the graphic. R1 is unable to establish an OSPF neighbor relationship with R3. What are possible reasons for this problem? (Choose two.) A. All of the routers need to be configured for backb ...
A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network?
A router receives information about network 192.168.10.0/24 from multiple sources. What will the router consider the most reliable information about the path to that network? A. a directly connected ...
When running EIGRP, what is required for RouterA to exchange routing updates with RouterC?
Refer to the exhibit. When running EIGRP, what is required for RouterA to exchange routing updates with RouterC? A. AS numbers must be changed to match on all the routers* B. Loopback interfaces m ...
Which statement describes the process ID that is used to run OSPF on a router?
Which statement describes the process ID that is used to run OSPF on a router? A. It is globally significant and is used to represent the AS number. B. It is locally significant and is used to ide ...
A network administrator is trying to add a new router into an established OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers. Given the information in the partial configuration shown below, what configuration error is causing this problem?
A network administrator is trying to add a new router into an established OSPF network. The networks attached to the new router do not appear in the routing tables of the other OSPF routers. Given the ...
What are two benefits of using a single OSPF area network design? (Choose two.)
What are two benefits of using a single OSPF area network design? (Choose two.) A. It is less CPU intensive for routers in the single area. B. It reduces the types of LSAs that are generated. C. ...
What two things will a router do when running a distance vector routing protocol? (Choose two.)
What two things will a router do when running a distance vector routing protocol? (Choose two.) A. Send periodic updates regardless of topology changes. B. Send entire routing table to all routers ...
If the router Cisco returns the given output and has not had its router ID set manually, what value will OSPF use as its router ID?
Refer to the exhibit. If the router Cisco returns the given output and has not had its router ID set manually, what value will OSPF use as its router ID? A. 192.168.1.1 B. 172.16.1.1 C. 1.1.1.1 ...
What OSPF command, when configured, will include all interfaces into area 0?
What OSPF command, when configured, will include all interfaces into area 0? A. network 0.0.0.0 255.255.255.255 area 0 B. network 0.0.0.0 0.0.0.0 area 0 C. network 255.255.255.255 0.0.0.0 area 0 ...
When a router undergoes the exchange protocol within OSPF, in what order does it pass through each state?
When a router undergoes the exchange protocol within OSPF, in what order does it pass through each state? A. exstart state > loading state > exchange state > full state B. exstart state & ...
The speed of all serial links is E1 and the speed of all Ethernet links is 100 Mb/s. A static route will be established on the Manchester router to direct traffic toward the Internet over the most direct path available. What configuration on the Manchester router will establish a route toward the Internet for traffic that originates from workstations on the Manchester LAN?
Refer to the exhibit. The speed of all serial links is E1 and the speed of all Ethernet links is 100 Mb/s. A static route will be established on the Manchester router to direct traffic toward the Inte ...
The network administrator must establish a route by which London workstations can forward traffic to the Manchester workstations. What is the simplest way to accomplish this?
Refer to the exhibit. The network administrator must establish a route by which London workstations can forward traffic to the Manchester workstations. What is the simplest way to accomplish this? A. ...
Which parameter or parameters are used to calculate OSPF cost in Cisco routers?
Which parameter or parameters are used to calculate OSPF cost in Cisco routers? A. Bandwidth B. Bandwidth and Delay C. Bandwidth, Delay, and MTU D. Bandwidth, MTU, Reliability, Delay, and Load ...
The network administrator requires easy configuration options and minimal routing protocol traffic. What two options provide adequate routing table information for traffic that passes between the two routers and satisfy the requests of the network administrator? (Choose two.)
Refer to the exhibit. The network administrator requires easy configuration options and minimal routing protocol traffic. What two options provide adequate routing table information for traffic that p ...
Which two statements about the OSPF Router ID are true? (Choose two.)
Which two statements about the OSPF Router ID are true? (Choose two.) A. It identifies the source of a Type 1 LSA. B. It should be the same on all routers in an OSPF routing instance. C. By defa ...
200-301 CCNA
2638 Reviews
350-401 ENCOR
2135 Reviews
350-701 SCOR
793 Reviews
CCIE Enterprise Infrastructure Lab
1634 Reviews
CCIE Security Lab
822 Reviews
